       Release Notes for Version 02.06.01 of the J1699-5 software


This release includes the requirements of version 2.6 of the J1699-5 document,
with the exceptions mentioned below. It is intended to test vehicles in
Model Year 2023 and beyond, that are compliant with SAE J1979-2


This is a beta test version, primarily to confirm proper communication between the application
and the vehicle and data formatting and values, but is not intended as an "official" vehicle validation.



NOTES:
 - Slow PCs/J2534 devices may cause false vehicle failures!
 - This release only supports the 0404 version of the J2534 API!


Some of the major differences from J1699-3:
	the application only attempts to connect to ISO15765 11-bit and ISO15765 29-bit protocols,
	only US vehicles and evaluations are currently implemented.


Some of the variances from version 2.6 of the J1699-5 spec:
	only J2534 04.04 is currently supported,
	physical addressing of requests is currently implemented only in Test 5,
	some tests which were in J1699-3 but not currently in J1699-5 are still run (ie recurring protocol determination after changing key state, vehicle state checks),
	Control of System, Test or Component ($31) tests are not currently implemented (noted in the log file as "NOT CURRENTLY IMPLEMENTED"), 
	drive cycle test (Tests 9.8-22), called out but not detailed in the spec, are implemented as in j1699-3 (only INF $F808 and $F80B are implemented for OBDCOND and INGCNTR)
	(These can be skipped by answering "No" to the prompt "Do you wish to run the CARB drive cycle portion for Permanent DTCs (Tests 9.8-9.22)?" at Test 9.7),
	prompt for type of engergy (internal combustion or zero-emission) as well as the subtypes (battery electric, fuel cell or cng, other) are not implemented,
	dynamic tests 10 and 11 are not currently implemented.


Version 02.06.01 adds the following features:
Issue #     Description
5-10011     Remove Freeze Frame Data test.
5-10015     Change Europe and China compliance types to better match document.
5-10016     Add definitions for EnergyType and FuelType and remove EngineType and gbDiesel to match document.


Version 02.06.01 fixes the following issues:
Issue #     Description
3-1062      Fix support checks for INF $F878.
3-1063      Fix support checks for INF $F877.
3-1065      Fix loss of accuracy in calculations with large values for $F8xx
5-10008     Fix loss of 29-bit communication after second determination of protocol.
5-10009     Fix incorrect text in support failure for $F4AD, $F4AF, $F4B0.
5-10010     Fix evaluation of IM Readiness bits in $F501 causing false failures.
5-10012     Fix error in handling response to SID $19 $04 $33 $04 (and $08).
5-10014     Fix Test 5.6 is failing all ECUs if they do not support EGS, CV, EGR, CSER.
